eISSN: 2081-2841
ISSN: 1689-832X
Journal of Contemporary Brachytherapy
Current Issue Archive Supplements Articles in Press Journal Information Aims and Scope Editorial Office Editorial Board Register as Author Register as Reviewer Instructions for Authors Abstracting and indexing Subscription Advertising Information Links
Editorial System
Submit your Manuscript
SCImago Journal & Country Rank

6/2023
vol. 15
 
Share:
Share:
abstract:
Original paper

The Montreal split ring applicator: Towards highly adaptive gynecological brachytherapy using 3D-printed biocompatible patient-specific interstitial caps

Yuji Kamio
1, 2, 3
,
Marie-Ève Roy
1
,
Lori-Anne Morgan
4
,
Maroie Barkati
1
,
Marie-Claude Beauchemin
1
,
François DeBlois
1, 2, 5
,
Borko Basaric
4
,
Jean-François Carrier
1, 2, 5
,
Stéphane Bedwani
1, 2, 5

  1. Centre Hospitalier de l’Université de Montréal (CHUM), Montréal, QC, Canada
  2. Centre de Recherche du CHUM (CRCHUM), Montréal, QC, Canada
  3. Département de Pharmacologie et Physiologie, Université de Montréal, Montréal, QC, Canada
  4. Adaptiiv Medical Technologies Inc., Halifax, NS, Canada
  5. Département de Physique, Université de Montréal, Montréal, QC, Canada
J Contemp Brachytherapy 2023; 15, 6: 453–464
Online publish date: 2023/12/12
View full text Get citation
 
Purpose:
The addition of interstitial (IS) needles to intra-cavitary (IC) brachytherapy applicators is associated with improved outcomes in locally advanced cervical cancers involving parametrial tumor extensions. The purpose of this work was to validate a clinical workflow involving 3D-printed caps for a commercial IC split ring applicator that enable using IS needle trajectories tailored to each treatment.

Material and methods:
A dedicated software module was developed in this work allowing users to design patient-specific IS caps without knowledge of computer-aided design (CAD) software. This software module was integrated to 3D Brachy, a commercial software developed by Adaptiiv Medical Technologies Inc. For validation of the workflow, CAD models of ground truth caps with five IS needle trajectories were designed with Fusion 360™, 3D-printed, assembled with a split ring applicator, and CT-scanned with radio-opaque markers. 3D Brachy was then applied to generate a replica based on trajectories reconstructed from the radio-opaque markers. A comparison between ground truth and replicated IS needle trajectories was done using intersection points with planes at the level of the cervix (z = 0 cm) and a representative needle depth (z = 3 cm).

Results:
Prototypes of interstitial caps 3D-printed in both BioMed Amber and BioMed Clear SLA resins were tested to be functional both pre- and post-sterilization for IS needles with obliquity angles ≤ 45°. Distance-to-agreement at z = 0 cm and 3 cm as well as deviations in pitch and yaw angles of the five IS needle trajectories were found to have mean values of 3.3 ±2.1 mm, 7.3 ±2.0 mm, 2.9° ±2.3°, and 7.0° ±7.0°, respectively.

Conclusions:
The clinical workflow for image-guided adaptive cervical cancer brachytherapy using the Montreal split ring applicator was validated.

keywords:

cervical cancer, 3D-printing, image-guided adaptive brachytherapy, gynecological applicator, combined intra-cavitary and interstitial brachytherapy

 
Quick links
© 2024 Termedia Sp. z o.o.
Developed by Bentus.